BYTECH BTM 25 Operated Diaphragm Pumps non metallic Eigenschappen: Max. capaciteit 189 l/min Max. druk 8.6 bar Air conn. 1/2" BSP/NPT Liquid conn. Combi flange DIN PN10/16 Maximum suction lift (dry) 4.9 m wc Certificaten ATEX Liquid conn. DN25 - 1 Ansi 150 Maximum suction lift (wet) 8.8 m wc Maximale grootte vaste delen 3.2 mm Max. viscositeit 10000 mPa.s Max. temperatuur 82 °C Materials liquids parts Polypropylene, Conductive Polypropylene, Kynar Materials valves seats Acetal, Aluminium, Buna N, Geolast, Polypropylene, Kynar(PVDF), Hytrel, Santoprene, Stainless Steel, Viton

STRONG. FAST. COMPACT. THAT IS BULKUP POWER! Bulk material handling made easy! Out of big bags or sacks, and into wagons, trucks or containers. Regardless where you need your product: The BULKup conveys whatever you want and where you want it. On-site filling, emtying or conveying, easy product changes or gentle handling of the product - no demixing, almost 100 % residual emptying and all of this without any backflow, agglutination or compacting. So, when will you start your BULKup power?

Our BurstCheck break indicators have a latest extension; The BC2-H2 for Hydrogen service is a rupture disk burst indicator to indicate the bursting of a rupture disk In addition, we have our BC series in different variants with very different breaking pressures, for industrial and hygienic applications.

The magnetic level gauge model BNA consists of a bypass chamber, which, as a communicating tube, is connected laterally to a vessel via at least 2 process connections. Through this type of arrangement, the level in the bypass chamber corresponds to the level in the vessel. The float with a built-in permanent magnetic system, which is mounted within the bypass chamber, transmits the liquid level, contact-free, to the magnetic display mounted to the outside of the bypass chamber.

CCS-3000 - Designed for Coke, Coal & Sinter and darker products that can be difficult to read with competing near-infrared sensors. Installed directly on the production line, this unit provides instant, continuous data displayed on a laptop or connected to a PLC.

Van Beek introduces Celsius Volta, an innovative electrically heated screw heat exchanger. This new development offers energy savings of at least 25%, and advanced process control thanks to individually adjustable temperature zones. The Celsius Volta heats and dries products without using thermal media such as steam, hot water or thermal oil. As a result, there is no energy loss due to heat transfer through pipelines, no risk of leaks and the process’s energy infrastructure is greatly simplified. Electric heating takes place directly in the machine, ensuring maximum efficiency. The absence of thermal media means that the machine heats up faster, and less energy is lost when cooling. The option to set the temperature zones separately allows for accurate control of the process. This offers advantages for those production processes that benefit from a gradual rise in temperature or specific temperature settings distributed along the length of the machine. The Celsius Volta aligns perfectly with the electrification of the process industry, an important step in reducing CO₂ emissions and dependence on fossil fuels. This is a proprietary technology that has been fully developed by Van Beek, and is currently subject to a patent application. The first test machine is available to customers who want to experience the energy savings and process benefits of the Celsius Volta. The Celsius Volta is an efficient solution for heating, drying or mixing products in, among others, the chemical and food industries. The technology is ideal for processes involving viscous masses, powders and granules, where the screw ensures the correct temperature and residence time in the machine. The machine is available in various sizes, and can be fully adapted to specific customer needs. Want to know more? To find out how Celsius Volta can improve your process, please contact us.

CENTRAL VACUUM SYSTEMS Depending on the application, energy savings of up to 70 % can be achieved with a central vacuum system. And this is not the only benefit. Selecting the right vacuum supply in vacuum processes has a significant influence on the operational safety and the economic efficiency of the whole process. In a plant which uses multiple machines that require vacuum, it may be worth considering a centralization of the vacuum supply. Busch is the leading provider of customized vacuum and overpressure systems. We have more than 50 years of experience in designing and building tailor-made systems for all industries. Significant savings - Demand-driven control - Easier and faster maintenance during normal working hours - Heat recovery (50-70 % of energy consumption) - Reduced demand for air conditioning (if applicable) Increased productivity - Lower required pumping speed, resulting in a reduced number of vacuum pumps - High uptime and reliability because of stand-by vacuum modules - Long lifetime thanks to evenly distributed workload - Higher flexibility due to on-demand vacuum, expansion of system often possible Improved working environment - Set up in special equipment rooms, separate from production areas - No noise emissions in production area - Lowest heat emissions in production area - Clean working environment in production area (e.g. no contact with hygienically sensitive zones during maintenance work)

Centrifugal sifter solutions for bulk solids and powder The Gericke centrifugal sifter is a rotary sieving machine designed to separate particles of different sizes into two product streams and to remove tramp and oversize materials. Gericke rotary sifters are specifically designed to meet the increasing demands of modern applications and processes. The machine range, sizes, features and configurations can be optimised for a wide variety of sifting applications.

Dinnissen's Centrifugal Sifters make it possible to sieve large quantities of product quickly and accurately. The centrifugal force in the rotating, cylindrical sieve ensures that the product is evenly sieved.

Fike CEREx™ Explosion Pressure Detectors are designed to continuously measure the pressures inside the protected hazards. The extremely fast response time of the CEREx™ Pressure Detector allows the EPC to take more than four thousand samples every second. Using the same instantaneous speed, this information is then processed to determine if the pressure change is that of a developing explosion. The CEREx Pressure Detector utilizes a ceramic pressure sensing element. This ceramic element allows the detector to have high overload protection, corrosion resistance, and long-term stability. With ASIC technology, the detector is provided with high accuracy through compensation of linearity and temperature errors.

Cetec is one of the world's leading manufacturers of machinery designed especially for weighing, packing, and palletizing powders, granules, and piece products in paper or plastic preformed bags. Over 100 people work at the factory in Périgueux, located in the southwest of France, on the design and manufacture of weighers, bagging machines, and closing systems, as well as shrink wrappers and palletizers.

The APC Series compact bag palletizer uses an ideal combination of robotic and traditional palletizing technologies to optimize the benefits of both systems and create square and sturdy pallets. The innovative automatic gripper ensures precise bag positioning for maximum stability, while the palletizer's compact design and optional modules make it easy to adapt to your available space. The APC Series suits any pallet material and bag type for use in all common industries. Speed: up to 1.200 bags per hour. Features: wide range of bag sizes and patterns, multiple layout configurations, quick installation, capacity upgrade possible, overlapping bag stacking possible. Options: pallet preparation system, bag quality control devices, MES, bag accumulation and rejection systems.