A defined amount of product is taken out of the vertical product flow and poured into the outlet. A collecting vessel or plastic bag is filled at the end of the outlet. A special sealing protects the guiding of the longitudinal and rotary movement against the product. The movement is performed manually (pulling and rotating) or by means of a pneumatic actuator. Sealed-off product tube The sampler does not extend into the product flow between the samples The sampling system can be easily disassembled and cleaned.

Spray Shields are applicable where liquids are transported through pipes. When pipes, pipelines and valves are used to transport gases and liquids, gaskets are used to seal flange connections. Spray shields are covers that are applied around the flanges of pipelines to protect the environment and the installation or for faster detection of leaks using so-called indicative material.

The ROBBE mobile hopper scale is a discontinuous totalizing weighing equipment. This reliable weighing system is easy to move, so it can be stationed both on the quay as in the pilot. Due to the limited overall height and charge height of 4.3m, this hopper scale can be loaded easily and fast with a quay crane as with a bulldozer. The built-in compressor allows an autonomic use, you must only connect 1x 400VAC. The BR500XM is designed for products with a good mass flow and density of 0,4 to 0,8t/m³, it obtains a flow rate of 450m³ per hour where the installation doesn’t run yet at its maximum. The engineering, fabrication, installation and verifying of this unit is fully executed by Bascules Robbe. Weigh-technically, this weighing system is controlled by a SIEMENS S7-1500 PLC with SIWAREX FTA weighing module. Hereby, the ROBBE mobile hopper scale can be verified according to the MID European directive R107 for commercial purposes.

ARI-STEVI: Control Valves with pneumatic or electric actuator

ARI-STEVI-POS: Positioner for Control Valves

By means of an advanced Powder Rheometer and via water vapor sorption we can determine under what sort of conditions of temperature coupled to relative humidity a specific material becomes sticky or not. Constructing a Mollier diamgram can further assist in predicting such stickiness behaviour, ideal for spray drying of e.g. milk powders or for storage of materials.

Sweco Europe SA presents the new rectangular gyratory separator with patented, 3 years warranty drive system lubricated for life. SWECO’s horizontal uniform gyratory motion offers the highest performance per screen area | Sharp separations up to 12 screens inside one machine | High capacity on up to 49 square meters screening area| Superior screen cleaning | Low dynamic force | Material spread-ability | Maintenance free dynamic hanger system | High-wear design | Genius pneumatic quick-change screen technology - no tool design

The SWECO Classic Separator offers great value, quick delivery, and the performance you are accustomed to receiving from SWECO brand equipment. Available in 30-, 48-, and 60-inch diameter models, the Classic features a rugged, proven design backed by SWECO and the industry’s most experienced sales engineers. Features of the Classic Separator include a 12 month motor warranty, no-tools vibration adjustment, no-tools screen center tie-downs, easily accessible motor lubrication points and a hinged base door for easy weight access. The Classic separator has been optimally designed to support a wide range of basic separations. With drives and frames in stock, the Classic can be delivered in approximately two weeks or less, and because it is offered in standard configurations, a significant cost-savings has been realized and passed on to the customer. The SWECO Classic – a straightforward, better investment.

Fusion Screens are a revolutionary screen developed from a new technology that "fuses" the screen mesh to the tension ring. Fusion Screens have been designed to eliminate the use of adhesive, epoxy or silicone in screen manufacturing resulting in a unitary construction that minimizes the potential for contamination. Added benefits include precise repeatable tensioning and engineered uniform integral strain relief created from the complex robotic manufacturing process.

From concept to commissioning We have a wide range of high-quality individual technologies for you to choose from, but what we pride ourselves on the most, is our ability to help and support our customers from concept to commissioning and beyond. We enjoy working in close collaboration with our clients, and would happily help you find the optimum solution for your specific process requirements.

Dust leading to Inefficient Processes, Explosion Risks and Operator Health issues Dust, in all it’s forms, is bad for operations in multiple ways. It can clog pipes, create unpleasant and unhealthy work environments and even lead to Explosive Atmospheres. Downtime due to maintenance or cleaning leads to repetitive tasks and inhaling dust or even UFP’s are leading to unhappy workers that would prefer to work somewhere else. Not knowing when the next unexpected stop or even explosion occurs, is not how you would like to run your site.

The Galahad fully automatic bag cutting and emptying system has been TBMA's optimum bulk transfer solution for cutting and emptying various types of bag materials for more than four decades. The Galahad ensures continuous dust-free and hygienic emptying of the bags with a residual value between 0.01% and 0.05% for smooth-running products. The system can directly fill a bulk truck or be connected to a pneumatic or mechanical transport system. Depending on the characteristics of the product and the design of the bags, capacities of up to 50 tonnes per hour can be achieved. The standard version is good for a capacity of 20 tons per hour. For smaller components, TBMA has various dust-proof bag dumping cabinets, which - mobile or otherwise - can be integrated into a Big-Bag unloading installation.

The Technipes Futura bagging installation is an extremely strong and flexible machine for packing powders and granulates in open-mouth bags. The machine is suitable for paper, plastic and with some options PP bags, from 5 to 50 kg. Bag size and product changeover is fully automatic.