User-friendly cuffs for all applications Want to perfectly connect the ends of piping? The right connection of a pipe to a machine part? Our fittings simplify the assembly of pipes and equipment. With our extensive material knowledge and versatile production capabilities, we can supply cuffs for almost every application. Food-safe, explosion-proof (ATEX), and user-friendly! All common installation methods are possible, from hose clamp mounting to Jacob, TriClamp, or the innovative BFM FITTING.

HECHT's flexible dosing system FDS is a hygienic product-gentle dosing system. It is used for metering bulk solids and can be integrated in almost every filling and dosing station. The target weight can be input by an metering control unit, then the right weight is controlled with the support of an weighing unit. When the target weight is reached the product flow is stopped. Up to the dosing unit a precision of a few grams can be reached. - Inline dosing unit without mechanical parts in the product flow - The pneumatically operated mechanics additionally break product bridges - The full nominal diameter can be used for the product flow - Quick and easy exchangeable squeeze tube - Hermetically sealed housing - Hygienic squeeze tube connection - design patent pending

Bulk powders are characterised by seven mechanical measurements and three supporting measurements. This provides a numerical evaluation of the characteristics of a powder by determining the flowability and floodability at the transition points when transferred from a static to a dynamic state. The measured values are assigned to indices based on standardised analysis of about 3000 different bulk materials by R.L. Carr.

High quality food ingredients, free of any kind of contamination, determine the quality of the final product, such as healthy and reliable baby food or the finest cookies, snacks and sweets. For designing and building installations that produce ingredients, J-Tec combines its expertise in building process installations for A-brand producers in the food industry with its knowhow in handling products such as lactose, starches, yeast, flavours, sugar, spices, flours, oils and fats. We have extensive experience in delivering high-end process installations throughout the entire food chain.

High quality food ingredients, free of any kind of contamination, determine the quality of the final product, such as healthy and reliable baby food or the finest cookies, snacks and sweets. For designing and building installations that produce ingredients, J-Tec combines its expertise in building process installations for A-brand producers in the food industry with its knowhow in handling products such as lactose, starches, yeast, flavours, sugar, spices, flours, oils and fats. We have extensive experience in delivering high-end process installations throughout the entire food chain.

The unique Fortress metal detector uses the latest digital technology to detect and discharge ferrous and non-ferrous metals, including stainless steel. Fortress systems have the highest detection power and are renowned for their superior speed, accuracy and ease of use. Fortress metal detectors are available in various versions: including Jansen Techniek conveyor, for pipelines or as a free-fall detector.

FOSSA scroll vacuum pumps have been designed according to the latest single-sided scroll technology. They combine dry compression with a fully hermetic construction. With their low noise and vibration levels, these vacuum pumps are the ideal solution for analytical and scientific applications in the medium vacuum range. They have proven themselves in this sector for years. Hermetically sealed for analytical and scientific applications! - Fully hermetic construction - Quiet operation - Minimized operating costs - Minimal maintenance - Oil-free operation

Finish Thompson magnetic coupled transfer pump. Dry-running insensitive. Best-in-class efficiency. Designed to deliver performance. DB Series Flooded Suction Pumps The Standard for Hydraulic Efficiency and Corrosive Fluid Handling Sealless mag-drive design Engineered for performance and proven in the field Runs dry for hours without damage when equipped with a carbon bushing Best efficiency of any pump in its class Polypropylene or PVDF corrosion resistant construction No seal replacement and no leaks Horizontal or vertical installation (with IEC motor only) High specific gravity handling – over 1.8s

ULTRA RELIABLE Engineered for extreme reliability in the most extreme chemical processing applications, ULTRAChem® is a magnetically driven, ANSI dimensional pump. It is constructed from tough ductile iron with DuPont Tefzel® (ETFE) lining for superior corrosion resistance. ULTRA DURABLE Industry’s lowest radial loads are the result of a modified concentric volute or partial splitter casing depending upon model, fully supported shaft and self-aligning dual bushings designed for optimum alignment preventing premature wear. Careful design balances axial forces inside the pump controlling excess thrust loads. Complete encapsulation of inner drive magnets in ETFE ensures ultimate corrosion protection. These are just some of the features designed into the ULTRAChem Series pumps to ensure optimum pump life. ULTRA SEALLESS Powerful neodymium magnets drive the impeller through a carbon-filled ETFE lined barrier for dependable, leak-free operation with no environmental emissions, no power-robbing double mechanical seals and no seal support systems.

Automated outer kraft removing A new standard in hygiene and efficiency. PanPac has identified a need to automate the process of removing the kraft out-liner from bags containing milk powder — a process traditionally performed manually in the dairy industry. PanPac’s laser cutting bag opener eliminates repetitive manual tasks and minimizes operator contact with the packaging, contributing to a safer, more efficient, and hygienic production process. Patented technology PanPac has developed a patented technology that uses laser cutting to remove the outer kraft without damaging the PE inner liner. This eliminates the need for maintenance and service of cutting tools such as knives, resulting in a reliable and hygienic solution with minimal service requirements. The solution is ideal for companies handling products in open-mouth bags with PE inner liners. This includes both dairy producers and pharmaceutical manufacturers,where hygiene and process optimization are critical. Flexible solution Our laser cutting kraft removing solution is highly versatile and can be used for all types of products packed in bags with PE inner liners - regardless of industry. Capacity: 200 bags/hour.

Kalkman Projects has made an innovative leap in the industry by developing a fully automatic bag emptying system. This groundbreaking system brings a host of benefits, resulting in increased efficiency and productivity. Firstly, the system eliminates the need for manual labor, promoting a safer and more ergonomic work environment. In addition, it can handle bags of various sizes and types, reduces contamination and makes it versatile and adaptable to different industrial needs. This advanced bag emptying system also significantly reduces the risk of product loss, as it empties bags accurately and thoroughly. It's not just cost-saving but also enhances the speed and accuracy of processing, leading to improved production efficiency.

Kalkman Projects in collaboration with PanPac Engineering offers a patented fully automatic bigbag filling system with robot, that can be built into an existing filling station. With this solution the customer's costs are reduced with 50% compared to other market solutions, as the existing filling station remains. Some of the benefits are: - Handling of bigbags in all sizes - Saving an operator - Time saving - Low investment - Fast amortization - Increase in productivity - Improved working environment - reduction of unilaterally, repeated work

These pumps have a free shaft end and are suitable for pumping lubricating liquids with a maximum viscosity of 100,000 cPoises. The pumps are available in cast iron or stainless steel AISI 316 in combination with various materials for the bearing bushes.